Moore's Sewing, Vacuum and FanMoore's Sewing, Vacuum and Fan

Customer Service: 1-800-865-9664

Floriani Fusible or Standard Cutaway Stabilizer

Be the first to review this product

Availability: In stock

$15.99

Quick Overview

When stability is the priority, Floriani's Cutaway Medium Stabilizer offers the no-stretch properties needed to provide support for light to medium stitch count designs on most weights of knits and wovens. It comes in fusible and standard for your conveniance.

* Required Fields

$15.99
Floriani Fusible or Standard Cutaway Stabilizer

More Views

  • Floriani Fusible or Standard Cutaway Stabilizer

Details

Floriani's Cutaway Stabilizer is a very soft yet a solid 2.0 oz stabilizer that will support medium to heavy stitch count designs. It comes in fusible and standard and is ideal for fabrics that are considered un-stable; fabrics such as fleece, t-shirts, sweatshirts, polo knit, etc. One layer provides all the support you should need for smooth embroidery results.

Floriani's Medium Cutaway Fusible stabilizer has a light fusible coating and is ideal for knits that tend to distort or stretch when they are hooped and/or when the embroidery is forming. The uniqueness of this product is the fact that it is fusible. This eliminates the need for messy spray adhesives which leave a residue on the needle, machine and fabric. By fusing the stabilizer to the back of the garment, embroiderer's are more successful in hooping and do not stretch the garment out of shape. Most importantly, the stabilizer is attached to the entire area where the embroidery will be stitched unlike spray adhesives which only "spot" tack and allow shifting of the fabric.

  • Use on non-stable stretch fabrics
  • Will support a design density of about 14,000 stitches and well digitized.
  • Super soft feel makes it ideal for sweatshirts, fleece and sweater knits.
  • Available in a fusible version which eliminates the need for spray adhesives or basting.

To use Floriani Medium Cutaway:

  1. Cut a piece of the stabilizer at least one inch larger than the hoop size you are planning to use.
  2. Place the stabilizer to the wrong side of the fabric and hoop. Note! If using the fusible version, use a low to medium temp, dry iron (260°F, silk setting) to adhere to stabilizer to the back side of the fabric. The surface of the iron should touch the fabric not the stabilizer. Use a pressing cloth if necessary.
  3. Place the embroidery frame on the machine and complete the design. Note! If the design is denser than 14,000 stitches or if it is a poorly digitized design (too many stitches for the designs size), float an additional layer of Floriani Medium Tearaway between the hoop and the bed of the machine for each additional 10,000 stitches for added support.
  4. Once the design is complete, remove the hoop and garment from the machine and trim the stabilizer close to the design. If you have fused the stabilizer to the garment, apply heat and then pull it to the designs edge before trimming.
  5. Floriani's Cutaway Medium Product Identity

    FCM1210    12" x 10 yds

    Floriani's Cutaway Medium Fusible Product Identity

    FCMF1210    12" x 10 yds
    FCMF1225    12" x 25 yds
    FCMF2010    20" x 10 yds

Additional Information

SKU FCM
Manufacturer Floriani
Color White

You may also be interested in the following product(s)

Floriani Tearaway Medium Stabilizer (Black or White)

Floriani Tearaway Medium Stabilizer (Black or White)

$12.99
Floriani Perfect Stick Tearaway Stabilizer

Floriani Perfect Stick Tearaway Stabilizer

$44.99
Floriani Template Tearaway

Floriani Template Tearaway

$24.99
Floriani Wet N Gone Water Soluble Fusible Stabilizer

Floriani Wet N Gone Water Soluble Fusible Stabilizer

$32.99