Embellish Foolproof Repositionable Webbing – 15″ x 5 yards

Description

Embellish Foolproof Repositionable Webbing 15″ x 5 yards makes appliqué and fabric crafting easier, cleaner, and more accurate. This permanent fusible webbing features a light tacky side that lets you reposition materials before setting them with heat. Perfect for machine embroidery, digital cutting, or even no-sew projects, it fuses permanently without adding bulk and maintains a soft, flexible feel. Ideal for use on baby clothes, paper crafts, party favors, and more, it’s a versatile stabilizer that brings precision and ease to any project.

Contents:

Made in America. Constructed of soft, woven fibers with a pressure-sensitive, needle-friendly adhesive on one side and a permanent fusible coating on the opposite side.

How To Use:

1. Pre-heat the fabric using a medium/high temp (Wool Setting, No Steam) to prep the fabric and remove moisture. It is also recommended to pre-wash the fabric (no softener or dryer sheets) being used as an appliqué to remove any sizing. This will ensure a good bond.
2. Fuse the webbing to the wrong side of the fabric using a medium/high temp (Wool Setting, No Steam) on your iron. The fusible side of Embellish® Foolproof Repositionable Webbing is the soft/shiny side. Hold the iron in place for 10 seconds, let the fabric cool and then flip the piece over and press again on the fabric side for another 10 seconds. Make sure you have a good bond. If not, repeat the fusing process for 5 seconds on each side instead of 10 seconds. Let the fabric cool before using.
3. Cut with scissors, a fabric die or a digital cutter (place the paper side down on the digital cutting mat).
4. Draw an “X” on the release paper backing, using the Embellish® Vinyl Weeding Tool. This will perforate the paper so it can easily be torn away, exposing the sticky surface.
5. Position the appliqué piece on the garment and fuse with the iron, using a medium/high temp (Wool Setting, No Steam). Hold the iron over the fabric for 10 seconds. Let the material cool.
6. Finish by stitching around the appliqué with a satin stitch, decorative stitch or in-the-hoop.

Important – All irons heat differently. The iron temperature given is a starting point. If you find that you are not getting a good fuse, slowly increase your iron’s temperature until you achieve a good bond between the fabric and the webbing. Using too high a temp can cause the permanent bond to activate prematurely before it adheres the fabric.

Laundering and Care:

Launder and dry the item according to the fabric material fiber content.