Floriani Fusible Bold Cutaway Stabilizer – 20″ x 10 yards

Description

Floriani Fusible Bold Cutaway Stabilizer is a very soft yet solid stabilizer designed to support medium to heavy stitch count designs. It is ideal for unstable and stretch fabrics that are prone to distortion during hooped embroidery. The light fusible coating allows the stabilizer to bond securely to the back of the garment, improving hooping success and preventing fabric from stretching out of shape. Floriani Fusible Bold Cutaway is especially well-suited for sweatshirts, fleece, and sweater knits, offering a soft feel with strong support.

To use Floriani Fusible Bold Cutaway:

1. Cut a piece of the stabilizer at least one inch larger than the hoop size you are planning to use.
2. Place the stabilizer to the wrong side of the fabric, fuse and hoop. Use a low to medium temp, dry iron (260° F (120°C) Silk Setting) to adhere to stabilizer to the back side of the fabric. Avoid touching fusible coating with the iron. Use a pressing cloth if necessary.
3. Place the embroidery frame on the machine and complete the design.
4. Once the design is complete, remove the hoop from the machine and trim the stabilizer close to the design. Apply heat then pull stabilizer to the design’s edge before trimming.

**NOTE: All irons heat differently. The iron temperature given above is a starting point. Slowly increase iron temperature as needed until a good bond is achieved between the fabric and stabilizer.