Free Shipping Over $69 in the contiguous United States - Shipping Policy Here
Durkee Cap Frame Insert for Single Needle Machines
$195.00
The Durkee Cap Frame Insert is an all metal frame for embroidering caps with monograms, logos and designs. Durkee’s Single Needle Cap Hoop Frame inserts into either a Brother 5″x7″ (SA439) hoop or the Baby Lock 5″ x 7″ (EF75) Hoop. The bill of the cap clamps securely in place while the embroiderer presses down the front portion of the cap held in place with sticky backing/stabilizer. This Single Needle Hat Frame Insert allows the embroiderer to stitch a design or logo approximately 4 1/2″ wide and 4 1/2″ tall. The frame also provides both vertical and horizontal alignment guides and slots for consistent embroidery placement.
See below for list of compatible machines.
Note: Please allow 2-3 weeks for delivery.
Description
Compatible Machines:
Durkee Cap Frame Insert is only compatible with embroidery machines that use the SA439/EF75 hoops.
Brother
- BP2100
- Duetta 4500D/4700D/4750D
- Quattro6000D/Quattro 2 6700D
- Quattro® 3 Trilogy Limited Edition Innov-ís 6750D
- DreamCreator XE VM5100
- Dream Maker XE VE2200
- Dream Machine XV8500D/XV8550D
- Dream Weaver XE VM6200D
- Innovis 1500 1500D 2500 2800D 3500D
- Innovis 4000D 5000 5000D XV8500D
- Innovis I / Ie / V3 / V5 / V7
- Innovis NQ1400E NQ3500D
- Innovis Essence VM5200
- Luminaire Innov-ís XP1
- Brother Stellaire Innov-ís XE1 Embroidery-Only Machine
Baby Lock
- Aventura BLMAV
- Destiny BLDY, BLDY2
- Ellegante BLG BLG2 BLG3
- Ellageo Plus BLL BLL2
- Ellisimo BLSO
- Ellisimo BLSOG BLSOG2 BLSOG-NZ
- Esante BLN
- Flourish BLMFO
- Journey BLJY
- Meridian (BLMA)
- Solaris 2
- Spirit BLPY
- Unity BLTY
Durkee Cap Frame Insert is not to be used with the following machines:
- Baby Lock Aventura II & Flourish II
- Brother NQ 1600E & NQ 3600
Additional information
| Weight | 2 lbs |
|---|---|
| Dimensions | 8 × 8 × 1.5 in |
Reviews
There are no reviews yet.