Floriani Wet N Gone Tacky Tape – 1″ x 10yds
Use Floriani Wet N Gone Tacky water-soluble tape to hold down corners of napkins and handkerchiefs, quilt bindings, edges of hand towels, ribbons and more!
Floriani WetNGone Tacky Tape 1″ x 10yds
This fibrous water-soluble stabilizer features a pressure-sensitive coating for holding hard to hoop items in place while you stitch or embroider.
Use the new tape size rolls for turning up hems for flawless stitching, securing decorative trims and edging or use as an ideal foundation for built-in decorative stitches.
Floriani WetNGone Tacky Tape 1″
Create free-standing lace and use just one layer for most designs
Perfect for making appliqués, decorative pins and/or 3-D embroidery.
Rinses clean leaving no messy residue
Use as a topping for wide satin stitch designs on high pile fabrics for perfect results!
To use regular Wet N Gone® for freestanding lace and/or embroideries:
Hoop one layer of the stabilizer within the embroider frame. Try to achieve “tight as a drum” tension without stretching or distorting the stabilizer.
Embroider the design.
Remove the product from the hoop and trim away as much of the stabilizer as possible.
Rinse away the Wet N Gone® using lukewarm water. *Tip – If your desire is to have the lace stiff, simply get the embroidery wet. Don’t rinse! The stabilizer will be absorbed into the stitching, then it will dry stiff.
**Note: Not all lace is considered “Free Standing”. If your desire is to have the embroidery stand on its own, please make sure the packaging states the design is “Free Standing Lace Embroidery”. If you have any doubt, include one layer of nylon organza in the embroidery frame with the Wet N Gone.
|Dimensions||4 × 5 × 1 in|