Floriani Press N Bond Ultra

Securely attach patches, appliqués, and embroideries to various fabrics with Floriani Press N Bond® Ultra, a transparent “no-sew” bonding material.

Say goodbye to traditional stitching methods and embrace the convenience of Press N Bond® Ultra. This innovative heat-activated adhesive effectively bonds fabrics without the need for needles and thread. Simply apply heat to create a strong and permanent bond that can withstand laundering and dry cleaning.

Key Benefits

• No-sew convenience: Eliminate the hassle of stitching and enjoy effortless bonding with Press N Bond® Ultra.
• Durable adhesion: The heat-activated formula creates a permanent bond that can withstand washing and dry cleaning.
• Versatility: Adheres to a wide range of fabrics, including vinyl, polyester, cotton, polycotton, and more.
• User-friendliness: Easy application with clear instructions.

Designed to work with:

• Digital & Laser Cutters
• Printable with Inkjet Printers

Application Instructions for Household Iron:

1. Preheat iron to Cotton setting. Steam is not needed.
2. Cut Floriani Press N Bond Ultra sheet slightly smaller than fabric.
3. Place the Floriani Press N Bold Ultra on flat ironing surface with the shiny side facing up. The backing sheet (printed Place This Side Down) should be facing the ironing surface.
4. Place fabric over Florian Press N Bond Ultra. Press iron straight down and hold for approximately 10-15 seconds to anchor fabric to adhesive. Move the iron back and forth over entire fabric surface to bond layers together.
5. Turn over the fused layers and iron again from paper backing side. Use of a press cloth is recommended to prevent the possibility of transferring printing to fabric.
6. Let fused fabric & Floriani Press N Bond Ultra cool completely. Cut using preferred method .
7. Remove the white Floriani Press n Bond Ultra backing sheet.
8. Place the fused element on base fabric, adhesive side of the element over the base fabric. Press for approx 10-12 seconds.

Heat Press Instructions:

1. Temperature setting: 345 degrees Fahrenheit
2. Pressure setting: medium
3. Place Floriani Press N Bond Ultra backing side down, exposed adhesive facing up. Place fabric wrong side to Press N Bold Ultra adhesive. Press for Seconds
4. Remove from press, let cool completely. Cut using preferred method.
5. Remove the white Floriani Press n Bond Ultra backing sheet.
6. Place the fused element on base fabric, adhesive side of the element over the base fabric. Press for 8-10 seconds.